combustion boiler combustion

[hhmee]

Ordinary combustion boiler combustion technology: The modulating burner gas volume that is adjustable and non-adjustable intake air volume ratio adjustment mode. Since the gas fireplace in working condition with new combustion air mixing ratio is, therefore, whether the boiler can achieve complete combustion of the mixture ratio is crucial. Working conditions are mixed in such a decorative wall cladding Malaysia complete combustion ratio, high combustion efficiency, low pollution emission targets. Ordinary boiler combustion technology malpractice is because the gas / air can not always achieve complete combustion of the mixing ratio, excess air ratio in the high part load, thus causing heat loss smoke away too large, higher polluting emissions targets, Thermal efficiency at partial load is low compared with full load conditions.

Common boiler main material mostly copper plus aluminum fins, life in 10--15 years. Because of its technical content and materials and other reasons, the price is more moderate. At present most of the domestic boiler needs of users because of its adaptability and gas price factor, they use such products. Calorific value boiler condensing technology Such fireplaces are condensed using current advanced technology in the world, is about to flue gas heat recovery, which is the proportion of premix combustion mode of regulation. In addition, the condensing boiler exhaust gas temperature can be reduced to a minimum of about 40 ℃, the latent heat of water vapor in the flue gas is substantially fully absorbed and utilized, therefore the thermal efficiency can be greater than 100% up to 109%.

More complete combustion, so that power consumption is very low, very good environmental indicators. Boiler combustion chamber made of stainless steel composite decking costs and materials or aluminum silicon material, acidic corrosion problems can be overcome, therefore, the boiler return water temperature limit, as much as the life of more than 20 years, excellent environmental protection and energy saving performance. Because the material is corrosion resistant, and therefore applicable to any heating system: radiators, floor heating, fan coil. This product usage market in Western Europe is about 60%, by the people's favorite.