How to distinguish good and bad tile

[hhmee]

Tile flooring is often used our materials, however loose, fall off and so on tiles often arise in the course, because the current fastness tile adhesive paste used in cement mortar is not enough, and long-term in a humid environment, so easy to loose and fall off, there is a reason for this is the poor quality of the tile. So, how to identify the tile and the bad? How to identify good tiles? Here to introduce you how to identify the quality of the tile.composite playground equipment 2. Identification of the quality of the tile to view the tile body color is pure. This trick is very simple, the back of the main observation tile color is uniform and consistent. Good quality tile, body color uniform, well-proportioned. 2. The quality of the identification tile tile cross-section of the particles to be observed whether the fine. Consumers should note that this does not refer to a cross-section of said cutting surface tiles around, but to tile fragment of breaks.

In general, it breaks in fine, hard and brittle, the same color for the top grade. Because the fine particles of ceramic tile waterproof capability; and particles larger tiles, immersed in water easily affect quality. 3, the differential pay attention to the quality of the tile thickness of the glaze layer. Glazed ceramic tile is what we call the entire surface of tiles, glazed and glaze layer thickness is cross-sectional thickness. Cost tile glaze is the most expensive material, the thicker the glaze layer, the better the natural quality. How to distinguish the quality of the tile?cheap replacement decking panels 4. Identification of the tile is good or bad to listen to. Tap the tile, listening for the sound crisp. The sound clear, sweet for the top grade, such as sound dull, as defective. 5. Identification of the tile you want to test the quality of water.

Consumers can pour some water on the back of the tile, to observe the speed absorbent tiles. After a few minutes, look at the front of the water leaving trace whether obvious.deck material required After the water infiltration slowly spread tile density, and water leaving obvious mark, regarded as the top grade. 6, identification tile is good or bad can take two bricks back to back and face to face, to see whether the contact can close the gap is too large Have phenomenon may determine whether there is warping. 7, to identify the quality of the tile can find ink applied to scrub the surface after one hour to see if there are traces, no signs of a good brick, have infiltrated determined not selected 8,use composite decking on a balcony the identification of good and bad tile can take two bricks amount geometry length and width of two bricks, brick size diagonal look no deviation deviation is superior product 9, the differential quality of the tile can refer business to provide national or industry testing agencies test report issued by comparing data the following indicators: water absorption, abrasion resistance, acid resistance and contamination identification contrast indicators.