Flooring Installation and acceptance

[hhm1020]

Visual inspection laying wooden floor surface planing, polishing, no scars, stubble clear Russia and burrs, pattern, color consistent surface edible vegetable oil, lay in the right direction, the surface layer tight joints, joints staggered position, clean surface. Laying skirting board joints tight, smooth, consistent height and out of the wall thickness. With 2 meters by foot inspection, floor coverings flatness error of less than 1 mm, slit width less than 0.3 mm, the skirting board laying mouth flatness error of less than 3 mm, patchwork flatness error of less than 2 mm.
Laying wood floor construction quality problems and treatment methods
Wood flooring common quality problems are hollowing sound when walking, laying an uneven surface, patchwork lax, local Alice drums.
1, there is hollowing sound: The reason is not real wood flooring fixed due mainly wool board and keel, gross floor plate and a small number of nails or staples too strong, sometimes because of the contraction caused by changes in the moisture content of the sheet or glue failed due. Control methods in addition to strict inspection sheet moisture content, adhesive, such as quality, after passing inspection before use, nails should not be too small when installed outside, and shall ensure that nailed, each finished laying a wooden floor, with no sound after the test foot hold one, if the sound should immediately rework.
2, the laying of surface irregularities: The main reason is the laying of the grass-roots or uneven wood floor deforms due to bagging. In laying the construction, application and acceptance level of foot, keel leveling the surface, if uneven laying skids should be adjusted. Ventilation should be done on a small groove keel. Laying plate margins should stay out of the wall 10 mm ventilation gap. Thermal insulation layer material must be dried to prevent postoperative damp floor bagging. Wood floor surface flatness error should be within 1 mm.
3, patchwork lax: In addition to the laying of non-standard construction, the width dimension of the sheet processing error and poor quality inro also an important reason, in addition to carefully examine the construction quality of the floor, the installation should be tongued and grooved plum Tiling, Grilled nail plate and nail before using the floor module slot die was unanimously after nailing.
4, the local drum Alice: In addition to the main reason for the board to damp deformation, there are too small or seamless patchwork wool board, the use of water pipes leaking bubble wet floor caused. To stay 3 mm gap when installing wool board in construction, carved wood keel ventilation slots. After floor coverings, floor brushing paint film should be complete, daily use to prevent water flowing into the lower portion of the floor, to clean up the water surface layer.
all link:
best composite wood in india
Engineered Wood Recycling
decorator fence 2ft high

[RemiMartyn]

There are many ways to make money. My advice is to have a think what skills you have and what you enjoy doing. Personally. I like crypto trading and can recommend you the best solana price prediction