decorative plates decorative panels

[hhm1020]

Thick decorative plates decorative panels, the national standard, the thickness of the veneer of not less than 0.2mm, usually within the industry will veneer thickness of more than 0.35mm thick decorative panels decorative panel called. Currently on the market most of the red beech veneer decorative plate thickness between 0.12-0.18mm, with increasing competition within the industry, products, manufacturers continue to improve technology, the veneer slicing thickness becomes thinner, so that lower costs, the decorative board has a lower competitive price, which is entirely due to the vicious competition caused epitomizes not regulate the domestic timber market. This thin decorative plate is cheap, but because of its thin veneer, easily lead to cracking, blistering, transparent plastic phenomenon occurs frequently, seriously affecting outdoor floor decking material singapore the decorative effect, reduce the service life, plus the northern dry climate, make this board quality problems often occur, so to remind you purchase decorative plate should look at price, pattern, but also to pay attention to its intrinsic quality, where the thickness of the veneer is a clear sign.

Currently foreign decoration industry, such as Europe, Japan, the American market is relatively mature, veneer thickness between 0.35-0.65mm, the cost of such plates up 30-50%, but its longer life times, quality problems occur rate is greatly reduced, as the maturity of the domestic timber industry, the industry has come to realize the advantages of the thick decorative panels and relative value, which has the following advantages: the use of hot dry paste technology, high bonding strength vivid color, with wood effect easy to crack, blister, transparent plastic. Long life to make it truly reflects the essence of the natural beauty of wood This panel is generally attached to the 3.6mm imported Meranti floor, because the floor directly affects decoration the intrinsic quality of the board. Purchase decorative plates Problems For the average consumer, decorative plate is a strange product, often just by its appearance to judge its quality is good or bad, in fact, many factors affect its intrinsic quality. 1. processing different veneer glued to the bottom of the table to go through cold, hot two-channel technology, some small manufacturers of products have not been pressing, easy to crack.

The veneer of different thickness, we recommend that you buy thick decorative panels. Longer life, better wood effect. 3. different floor board, according to the performance of sorting, better than hardwood Poplar, hardwood is better Meranti, we recommend that you purchase Meranti backplane. The formaldehyde content is different, craft glue formaldehyde content in different formulations containing Composite Edge Decks different amounts of formaldehyde, the state is less than 40mg / 100g designated as environmentally friendly products. 5. a different level, the national classification decorative plate is excellent, first-class, qualified. And corporate standards into AAA, AA, A division of these refers to the appearance grade quality rather than the intrinsic quality of the rating, but please note that at the time of purchase, and some small domestic manufacturers according to suit different level, define different brands, But all marked AAA trademark, confuse consumers, carefully distinguished.