The necessary conditions required to heat the floor

[hhmee]

A few days ago, Xiaobian Details of the relevant knowledge to warm, but a complete floor heating systems should also contain decorative surface decoration materials, such as flooring. So this flooring top ten brands of Chinese wood floor network organizers will introduce been widely used in heating equipment on the ground floor of geothermal products have what qualities do? We all know that with respect to the tiles without the breath of life in terms of surface decoration materials,wood polymer composite windows wooden flooring is a breathing, self-regulated products. Laying into the local geothermal environment at the same time the heat exchange of rapidly reduce the moisture, but at the end of the heating, will again absorb moisture from the air and expands.

In the seasons change, plastic teak hand rails some wood flooring sale problems will continue to exist, let alone geothermal environment under such severe conditions. However, research and development to ensure the floor, flooring manufacturers conscience jobs, and provide consumers with a large number of fully capable to heat the floor post products, then how these products are required to meet the kind of conditions? wooden plank deck construction A small amount of deformation of wood The amount of deformation due to timber species vary, it is possible to manufacture solid wood to heat the floor requires careful selection of species, such as selecting a dense wood species, in order to ensure long-term wood floor does not crack under high temperature deformation.

And if the flooring is with its criss-cross each other to contain structural advantages, can effectively break down the stress generated by the heating surface. Excellent thermal conductivity Floor thermal conductivity and thickness of the floor related to the thicker thermal effects worse, more heat loss,building a bar using composite decking but the thinner more easily deformed, generally preferable that the thickness is more suitable in 8-22�L. Good anti-surge water effects As the winter indoor dry, especially in the heated humidification is required, so the geothermal floor waterproof moisture resistance are equally important. Requirements under hot and humid state size small change, water expansion rate is less than or equal to 2.5%. In general, the smaller expansion, moisture resistant wood floor as possible.