Wood floor stability

[hhmee]

Wood floor stability better use of geothermal complex environment, especially in the northern region relatively dry, but also a sudden increase in the temperature of the heating surface geothermal, floor inevitably outdoor wpc flower box with all kinds of color bear the "temperature", "humidity" double test, so to heat the floor must buy Material good stability. According wood processing experience, Jiang Wu recommend the use of white oak (White Oak), red oak (Red Oak), teak and other wood species of three-layer parquet, they are resistant to dry heat capacity is relatively strong, not deformed.

Effect of heat conduction thick floor heating heat is transferred to the surface of the ground through the floor, so that there must be heat loss, over the floor should be able to reduce these losses. "Under normal circumstances, consumers believe that the more thick floor as possible, but if it is to heat the floor they should not vote for the election thin thick." Jiang Wu told reporters, "wood itself is a poor house roof rotating observation deck conductor of temperature, heat conduction process must be loss. "He suggested that relatively few consumers choose thin, thickness 12-15mm of three parquet will be better. This will not affect the thickness of the thermal features, but also to ensure good foot feeling comfortable. Installation make a good moisture off Geothermal floor during the installation must be done to deal with moisture, Jiang Wu told reporters, manufacturers will be in regular floor mats laid beneath moisture film, tape the damp proof membrane bonding tight seams, and the wall where you want to film extends upward to the wall 5-6 cm in height, which layer film mainly plays the role of overall ground moisture.

isolated from ground moisture on the floor of erosion, and then laying the floor. Taking into account any floor will wet up shrinkage characteristics, consumers use to heat the floor to pay attention to wood plastic door market control indoor humidity and temperature. After the first use of ground floor installed heating system should be slow to heat up at room temperature at 20 degrees the best. Also note that the indoor humidity should be not less than 40%, after we do not feel dry skin, and the floor will "feel" very comfortable.