In this zjautoparts case

[zjautoparts Lee]

In this zjautoparts case, the tools required are of the basic type. However, screw drivers in particular must be in as-new condition as they will be used to remove brass jets, and these can easily be damaged if the driver does not locate well.

Typical Tool Requirements:

Screw drivers, straight blade and cross head (sizes one and two)

Standard and metric socket sets

Steel rule (with metric and standard measurement)

Chemicals: WD40 or its equivalent,

A carburetor is a tube that air is sucked through into the engine. The speed of the engine is controlled by how much air the carburetor allows through it. As the air passes through the carburetor, it goes through a venturi section that has a straw sticking up into the air stream. Fuel is sucked up the straw ( called an emulsion tube) and mixed with the air going into the engine.

Remove float chamber. The first part of the disassembly process (assuming the slide has already been removed) is to remove the EGR valve spindle chamber.